BSDL Files Library for JTAG

The only free public library that contains thousands of BSDL (Boundary Scan Description Language) models to use with BScan/JTAG tools

BSDL model: sam4n16c

------------------------------------------------------------------------
-- A T M E L   A R M   M I C R O C O N T R O L L E R S                --
------------------------------------------------------------------------
-- BSDL file
--
-- File Name:     sam4n16c_tfbga100.bsdl
-- File Revision: 1.0
-- Date: 	  Mon May 21 17:00:00 2012

-- Created by:    Atmel Corporation
-- File Status:   Released
--
-- Device:        sam4n16c
-- Package:       tfbga100
--
-- Visit http://www.atmel.com for a updated list of BSDL files.
--
------------------------------------------------------------------------
-- Syntax and Semantics are checked against the IEEE 1149.1 standard. --
-- The logical functioning of the standard Boundary-Scan instructions --
-- and of the associated bypass, idcode and boundary-scan register    --
-- described in this BSDL file has been verified against its related  --
-- silicon by JTAG Technologies B.V.                                  --
------------------------------------------------------------------------
------------------------------------------------------------------------
--                       IMPORTANT NOTICE                             --
--                                                                    --
--   Copyright 2005 Atmel Corporation. All Rights Reserved.           --
--                                                                    --
--   Atmel assumes no responsibility or liability arising out         --
--   this application or use of any information described herein      --
--   except as expressly agreed to in writing by Atmel Corporation.   --
--                                                                    --
-- ------------------------------------------------------------------ --
-- This BSDL File has been verified on severals BSDL Syntax           --
-- Checker/Compilers                                                  --
--                                                                    --
-- http://www.asset-intertech.com/bsdl_service                        --
--   File Name: 	sam4n16c_tfbga100.bsdl
--   Timestamp: 	Monday, May 21, 2012 10:17 AM
--   Results: 	Entity name: sam4n16c
--   IEEE Std 1149.1-2001 (Version 2.0)
--   Packaging option selected is TFBGA100.
--   Inputs = 0
--   Outputs = 0
--   Bidirectionals = 70
--   Instruction Reg Length = 3
--   Boundary Reg Length = 142
--   
--   BSDL compilation of 615 lines completed without errors.
-- *****************************************************************************


entity sam4n16c is 

-- This section identifies the default device package selected. 

generic (PHYSICAL_PIN_MAP: string:= "tfbga100");

-- This section declares all the ports in the design.

port (
           PB0                  : inout   bit;
           PC29                 : inout   bit;
           PB1                  : inout   bit;
           PC30                 : inout   bit;
           PB2                  : inout   bit;
           PC31                 : inout   bit;
           PB3                  : inout   bit;
           PA17                 : inout   bit;
           PC26                 : inout   bit;
           PA18                 : inout   bit;
           PA21                 : inout   bit;
           PC27                 : inout   bit;
           PA19                 : inout   bit;
           PC15                 : inout   bit;
           PA22                 : inout   bit;
           PC13                 : inout   bit;
           PA23                 : inout   bit;
           PC12                 : inout   bit;
           PA20                 : inout   bit;
           PC0                  : inout   bit;
           PA16                 : inout   bit;
           PC7                  : inout   bit;
           PA15                 : inout   bit;
           PA14                 : inout   bit;
           PC6                  : inout   bit;
           PA13                 : inout   bit;
           PA24                 : inout   bit;
           PC5                  : inout   bit;
           PC4                  : inout   bit;
           PA25                 : inout   bit;
           PA26                 : inout   bit;
           PC3                  : inout   bit;
           PA12                 : inout   bit;
           PA11                 : inout   bit;
           PC2                  : inout   bit;
           PA10                 : linkage bit;
           PA9                  : inout   bit;
           PC1                  : inout   bit;
           PA8                  : linkage bit;
           PA7                  : in      bit;
           TDI                  : in      bit;
           PA6                  : inout   bit;
           PA5                  : inout   bit;
           PC28                 : inout   bit;
           PA4                  : inout   bit;
           PA27                 : inout   bit;
           PC8                  : inout   bit;
           PA28                 : inout   bit;
           NRST                 : in      bit;
           TST                  : in      bit;
           PC9                  : inout   bit;
           PA29                 : inout   bit;
           PA30                 : inout   bit;
           PC10                 : inout   bit;
           PA3                  : inout   bit;
           PA2                  : inout   bit;
           PC11                 : inout   bit;
           PC14                 : inout   bit;
           PA1                  : inout   bit;
           PC16                 : inout   bit;
           PA0                  : inout   bit;
           PC17                 : inout   bit;
           TDO                  : out     bit;
           JTAGSEL              : in      bit;
           PC18                 : inout   bit;
           TMS                  : in      bit;
           PC19                 : inout   bit;
           PA31                 : inout   bit;
           PC20                 : inout   bit;
           TCK                  : in      bit;
           PC21                 : inout   bit;
           PC22                 : inout   bit;
           ERASE                : inout   bit;
           PB10                  : inout   bit;
           PB11                  : inout   bit;
           PC23                 : inout   bit;
           PC24                 : inout   bit;
           PB13                 : inout   bit;
           PC25                 : inout   bit;
           XOUT                 : linkage bit;
           XIN                  : linkage bit;
           PB14                 : inout   bit
           );
use STD_1149_1_2001.all;

attribute COMPONENT_CONFORMANCE of sam4n16c : entity is "STD_1149_1_2001";

attribute PIN_MAP of sam4n16c: entity is PHYSICAL_PIN_MAP;

-- This section specifies the pin map for each port. This information is
-- extracted from the port-to-pin map file that was read in using the 
-- "read_pin_map" command.

constant tfbga100: PIN_MAP_STRING :=

        "PB1                         : A1 , "& 
        "PC29                        : A2 , "& 
        "XIN                         : A4 , "& 
        "XOUT                        : A5 , "& 
        "PB13                        : A6 , "& 
        "PB11                         : A7 , "& 
        "PB10                         : A8 , "& 
        "TMS                         : A9 , "& 
        "JTAGSEL                     : A10, "& 
        "PC30                        : B1 , "& 
        "PB14                        : B4 , "& 
        "PC21                        : B5 , "& 
        "PC20                        : B6 , "& 
        "PA31                        : B7 , "& 
        "PC19                        : B8 , "& 
        "PC18                        : B9 , "& 
        "TDO                         : B10, "& 
        "PB2                         : C1 , "& 
        "PC25                        : C3 , "& 
        "PC23                        : C4 , "& 
        "ERASE                       : C5 , "& 
        "TCK                         : C6 , "& 
        "PC16                        : C7 , "& 
        "PA1                         : C8 , "& 
        "PC17                        : C9 , "& 
        "PA0                         : C10, "& 
        "PB3                         : D1 , "& 
        "PB0                         : D2 , "& 
        "PC24                        : D3 , "& 
        "PC22                        : D4 , "& 
        "PA2                         : D8 , "& 
        "PC11                        : D9 , "& 
        "PC14                        : D10, "& 
        "PA17                        : E1 , "& 
        "PC31                        : E2 , "& 
        "NRST                        : E6 , "& 
        "PA29                        : E7 , "& 
        "PA30                        : E8 , "& 
        "PC10                        : E9 , "& 
        "PA3                         : E10, "& 
        "PA18                        : F1 , "& 
        "PC26                        : F2 , "& 
        "PA27                        : F6 , "& 
        "PC8                         : F7 , "& 
        "PA28                        : F8 , "& 
        "TST                         : F9 , "& 
        "PC9                         : F10, "& 
        "PA21                        : G1 , "& 
        "PC27                        : G2 , "& 
        "PA15                        : G3 , "& 
        "PA26                        : G6 , "& 
        "PA12                        : G7 , "& 
        "PC28                        : G8 , "& 
        "PA4                         : G9 , "& 
        "PA5                         : G10, "& 
        "PA19                        : H1 , "& 
        "PA23                        : H2 , "& 
        "PC7                         : H3 , "& 
        "PA14                        : H4 , "& 
        "PA13                        : H5 , "& 
        "PC4                         : H6 , "& 
        "PA11                        : H7 , "& 
        "PC1                         : H8 , "& 
        "PA6                         : H9 , "& 
        "TDI                         : H10, "& 
        "PC15                        : J1 , "& 
        "PC0                         : J2 , "& 
        "PA16                        : J3 , "& 
        "PC6                         : J4 , "& 
        "PA24                        : J5 , "& 
        "PA25                        : J6 , "& 
        "PA10                        : J7 , "& 
        "PA22                        : K1 , "& 
        "PC13                        : K2 , "& 
        "PC12                        : K3 , "& 
        "PA20                        : K4 , "& 
        "PC5                         : K5 , "& 
        "PC3                         : K6 , "& 
        "PC2                         : K7 , "& 
        "PA9                         : K8 , "& 
        "PA8                         : K9 , "& 
        "PA7                         : K10 ";

-- This section specifies the TAP ports. For the TAP TCK port, the PArameters in 
-- the brackets are:
--        First Field : Maximum  TCK frequency.
--        Second Field: Allowable states TCK may be stopped in.

   attribute TAP_SCAN_CLOCK of TCK : signal is (1.000000e+06, BOTH);
   attribute TAP_SCAN_IN    of TDI : signal is true;
   attribute TAP_SCAN_MODE  of TMS : signal is true;
   attribute TAP_SCAN_OUT   of TDO : signal is true;
   attribute TAP_SCAN_RESET of NRST: signal is true;

-- Specifies the compliance enable patterns for the design. It lists a set of 
-- design ports and the values that they should be set to, in order to enable 
-- compliance to IEEE Std 1149.1

   attribute COMPLIANCE_PATTERNS of sam4n16c: entity is 
        "(JTAGSEL, TST, PA7) (110)";

   
-- Specifies the number of bits in the instruction register.
   
   attribute INSTRUCTION_LENGTH of sam4n16c: entity is 3;
   
-- Specifies the boundary-scan instructions implemented in the design and their 
-- opcodes.
   
   attribute INSTRUCTION_OPCODE of sam4n16c: entity is 
     "BYPASS (111, 101, 110)," &
     "EXTEST (000)," &
     "SAMPLE (100)," &
     "PRELOAD (100)," &
     "USER1  (010)," &
     "HIGHZ  (001)," &
     "IDCODE (011)";
   
-- Specifies the bit pattern that is loaded into the instruction register when 
-- the TAP controller passes through the Capture-IR state. The standard mandates 
-- that the two LSBs must be "01". The remaining bits are design specific.
   
   attribute INSTRUCTION_CAPTURE of sam4n16c: entity is "001";
   
-- Specifies the bit pattern that is loaded into the DEVICE_ID register during 
-- the IDCODE instruction when the TAP controller passes through the Capture-DR 
-- state.
   
   attribute IDCODE_REGISTER of sam4n16c: entity is 
     "0000" &                  
 -- 4-bit version number
     "0101101100110110" &     
 -- 16-bit part number
     "00000011111" &           
 -- 11-bit identity of the manufacturer
     "1";                      
 -- Required by IEEE Std 1149.1
   
-- This section specifies the test data register placed between TDI and TDO for 
-- each implemented instruction.
   
   attribute REGISTER_ACCESS of sam4n16c: entity is 
        "BYPASS    (BYPASS, HIGHZ)," &
        "BOUNDARY  (EXTEST, SAMPLE, USER1)," &
        "DEVICE_ID (IDCODE)";
   
-- Specifies the length of the boundary scan register.
   
   attribute BOUNDARY_LENGTH of sam4n16c: entity is 142;
   
-- The following list specifies the characteristics of each cell in the boundary 
-- scan register from TDI to TDO. The following is a description of the label 
-- fields:
--      num     : Is the cell number.
--      cell    : Is the cell type as defined by the standard.
--      port    : Is the design port name. Control cells do not have a port 
--                name.
--      function: Is the function of the cell as defined by the standard. Is one 
--                of input, output2, output3, bidir, control or controlr.
--      safe    : Specifies the value that the BSR cell should be loaded with 
--                for safe operation when the software might otherwise choose a 
--                random value.
--      ccell   : The control cell number. Specifies the control cell that 
--                drives the output enable for this port.
--      disval  : Specifies the value that is loaded into the control cell to 
--                disable the output enable for the corresponding port.
--      rslt    : Resulting state. Shows the state of the driver when it is 
--                disabled.
   
   attribute BOUNDARY_REGISTER of sam4n16c: entity is 
--     
--    num   cell   port                    function      safe  [ccell  disval  
--    rslt]
--     
     "141  (BC_1,  *,                      control,      " &
     "1),                        " &
     "140  (BC_7,  PA16,                 bidir,        X,    141,    " &
     "1,      Z),  " &
     "139  (BC_1,  *,                      control,      " &
     "1),                        " &
     "138  (BC_7,  PC7,                  bidir,        X,    139,    " &
     "1,      Z),  " &
     "137  (BC_1,  *,                      control,      " &
     "1),                        " &
     "136  (BC_7,  PA15,                 bidir,        X,    137,    " &
     "1,      Z),  " &
     "135  (BC_1,  *,                      control,      " &
     "1),                        " &
     "134  (BC_7,  PA14,                 bidir,        X,    135,    " &
     "1,      Z),  " &
     "133  (BC_1,  *,                      control,      " &
     "1),                        " &
     "132  (BC_7,  PC6,                  bidir,        X,    133,    " &
     "1,      Z),  " &
     "131  (BC_1,  *,                      control,      " &
     "1),                        " &
     "130  (BC_7,  PA13,                 bidir,        X,    131,    " &
     "1,      Z),  " &
     "129  (BC_1,  *,                      control,      " &
     "1),                        " &
     "128  (BC_7,  PA24,                 bidir,        X,    129,    " &
     "1,      Z),  " &
     "127  (BC_1,  *,                      control,      " &
     "1),                        " &
     "126  (BC_7,  PC5,                  bidir,        X,    127,    " &
     "1,      Z),  " &
     "125  (BC_1,  *,                      control,      " &
     "1),                        " &
     "124  (BC_7,  PC4,                  bidir,        X,    125,    " &
     "1,      Z),  " &
     "123  (BC_1,  *,                      control,      " &
     "1),                        " &
     "122  (BC_7,  PA25,                 bidir,        X,    123,    " &
     "1,      Z),  " &
     "121  (BC_1,  *,                      control,      " &
     "1),                        " &
     "120  (BC_7,  PA26,                 bidir,        X,    121,    " &
     "1,      Z),  " &
     "119  (BC_1,  *,                      control,      " &
     "1),                        " &
     "118  (BC_7,  PC3,                  bidir,        X,    119,    " &
     "1,      Z),  " &
     "117  (BC_1,  *,                      control,      " &
     "1),                        " &
     "116  (BC_7,  PA12,                 bidir,        X,    117,    " &
     "1,      Z),  " &
     "115  (BC_1,  *,                      control,      " &
     "1),                        " &
     "114  (BC_7,  PA11,                 bidir,        X,    115,    " &
     "1,      Z),  " &
     "113  (BC_1,  *,                      control,      " &
     "1),                        " &
     "112  (BC_7,  PC2,                  bidir,        X,    113,    " &
     "1,      Z),  " &
     "111  (BC_0,  *,       internal,     X),    " & 
     "110  (BC_0,  *,       internal,     X),    " &  
     "109  (BC_1,  *,                      control,      " &
     "1),                        " &
     "108  (BC_7,  PA9,                  bidir,        X,    109,    " &
     "1,      Z),  " &
     "107  (BC_1,  *,                      control,      " &
     "1),                        " &
     "106  (BC_7,  PC1,                  bidir,        X,    107,    " &
     "1,      Z),  " &
     "105  (BC_1,  *,                      control,      " &
     "1),                        " &
     "104  (BC_7,  PA6,                  bidir,        X,    105,    " &
     "1,      Z),  " &
     "103  (BC_1,  *,                      control,      " &
     "1),                        " &
     "102  (BC_7,  PA5,                  bidir,        X,    103,    " &
     "1,      Z),  " &
     "101  (BC_1,  *,                      control,      " &
     "1),                        " &
     "100  (BC_7,  PC28,                 bidir,        X,    101,    " &
     "1,      Z),  " &
     "99   (BC_1,  *,                      control,      " &
     "1),                        " &
     "98   (BC_7,  PA4,                  bidir,        X,    99,     " &
     "1,      Z),  " &
     "97   (BC_1,  *,                      control,      " &
     "1),                        " &
     "96   (BC_7,  PA27,                 bidir,        X,    97,     " &
     "1,      Z),  " &
     "95   (BC_1,  *,                      control,      " &
     "1),                        " &
     "94   (BC_7,  PC8,                  bidir,        X,    95,     " &
     "1,      Z),  " &
     "93   (BC_1,  *,                      control,      " &
     "1),                        " &
     "92   (BC_7,  PA28,                 bidir,        X,    93,     " &
     "1,      Z),  " &
     "91   (BC_1,  *,                      control,      " &
     "1),                        " &
     "90   (BC_7,  PC9,                  bidir,        X,    91,     " &
     "1,      Z),  " &
     "89   (BC_1,  *,                      control,      " &
     "1),                        " &
     "88   (BC_7,  PA29,                 bidir,        X,    89,     " &
     "1,      Z),  " &
     "87   (BC_1,  *,                      control,      " &
     "1),                        " &
     "86   (BC_7,  PA30,                 bidir,        X,    87,     " &
     "1,      Z),  " &
     "85   (BC_1,  *,                      control,      " &
     "1),                        " &
     "84   (BC_7,  PC10,                 bidir,        X,    85,     " &
     "1,      Z),  " &
     "83   (BC_1,  *,                      control,      " &
     "1),                        " &
     "82   (BC_7,  PA3,                  bidir,        X,    83,     " &
     "1,      Z),  " &
     "81   (BC_1,  *,                      control,      " &
     "1),                        " &
     "80   (BC_7,  PA2,                  bidir,        X,    81,     " &
     "1,      Z),  " &
     "79   (BC_1,  *,                      control,      " &
     "1),                        " &
     "78   (BC_7,  PC11,                 bidir,        X,    79,     " &
     "1,      Z),  " &
     "77   (BC_1,  *,                      control,      " &
     "1),                        " &
     "76   (BC_7,  PC14,                 bidir,        X,    77,     " &
     "1,      Z),  " &
     "75   (BC_1,  *,                      control,      " &
     "1),                        " &
     "74   (BC_7,  PA1,                  bidir,        X,    75,     " &
     "1,      Z),  " &
     "73   (BC_1,  *,                      control,      " &
     "1),                        " &
     "72   (BC_7,  PC16,                 bidir,        X,    73,     " &
     "1,      Z),  " &
     "71   (BC_1,  *,                      control,      " &
     "1),                        " &
     "70   (BC_7,  PA0,                  bidir,        X,    71,     " &
     "1,      Z),  " &
     "69   (BC_1,  *,                      control,      " &
     "1),                        " &
     "68   (BC_7,  PC17,                 bidir,        X,    69,     " &
     "1,      Z),  " &
     "67   (BC_1,  *,                      control,      " &
     "1),                        " &
     "66   (BC_7,  PC18,                 bidir,        X,    67,     " &
     "1,      Z),  " &
     "65   (BC_1,  *,                      control,      " &
     "1),                        " &
     "64   (BC_7,  PC19,                 bidir,        X,    65,     " &
     "1,      Z),  " &
     "63   (BC_1,  *,                      control,      " &
     "1),                        " &
     "62   (BC_7,  PA31,                 bidir,        X,    63,     " &
     "1,      Z),  " &
     "61   (BC_1,  *,                      control,      " &
     "1),                        " &
     "60   (BC_7,  PC20,                 bidir,        X,    61,     " &
     "1,      Z),  " &
     "59   (BC_1,  *,                      control,      " &
     "1),                        " &
     "58   (BC_7,  PC21,                 bidir,        X,    59,     " &
     "1,      Z),  " &
     "57   (BC_1,  *,                      control,      " &
     "1),                        " &
     "56   (BC_7,  PC22,                 bidir,        X,    57,     " &
     "1,      Z),  " &
     "55   (BC_1,  *,                      control,      " &
     "1),                        " &
     "54   (BC_7,  ERASE,                   bidir,        X,    55,     " &
     "1,      Z),  " &
     "53   (BC_1,  *,                      control,      " &
     "1),                        " &
     "52   (BC_7,  PB10,                   bidir,        X,    53,     " &
     "1,      Z),  " &
     "51   (BC_1,  *,                      control,      " &
     "1),                        " &
     "50   (BC_7,  PB11,                   bidir,        X,    51,     " &
     "1,      Z),  " &
     "49   (BC_1,  *,                      control,      " &
     "1),                        " &
     "48   (BC_7,  PC23,                 bidir,        X,    49,     " &
     "1,      Z),  " &
     "47   (BC_1,  *,                      control,      " &
     "1),                        " &
     "46   (BC_7,  PC24,                 bidir,        X,    47,     " &
     "1,      Z),  " &
     "45   (BC_1,  *,                      control,      " &
     "1),                        " &
     "44   (BC_7,  PB13,                   bidir,        X,    45,     " &
     "1,      Z),  " &
     "43   (BC_1,  *,                      control,      " &
     "1),                        " &
     "42   (BC_7,  PC25,                 bidir,        X,    43,     " &
     "1,      Z),  " &
     "41   (BC_1,  *,                      control,      " &
     "1),                        " &
     "40   (BC_7,  PB14,                   bidir,        X,    41,     " &
     "1,      Z),  " &
     "39   (BC_1,  *,                      control,      " &
     "1),                        " &
     "38   (BC_7,  PB0,                    bidir,        X,    39,     " &
     "1,      Z),  " &
     "37   (BC_1,  *,                      control,      " &
     "1),                        " &
     "36   (BC_7,  PC29,                 bidir,        X,    37,     " &
     "1,      Z),  " &
     "35   (BC_1,  *,                      control,      " &
     "1),                        " &
     "34   (BC_7,  PB1,                    bidir,        X,    35,     " &
     "1,      Z),  " &
     "33   (BC_1,  *,                      control,      " &
     "1),                        " &
     "32   (BC_7,  PC30,                 bidir,        X,    33,     " &
     "1,      Z),  " &
     "31   (BC_1,  *,                      control,      " &
     "1),                        " &
     "30   (BC_7,  PB2,                    bidir,        X,    31,     " &
     "1,      Z),  " &
     "29   (BC_1,  *,                      control,      " &
     "1),                        " &
     "28   (BC_7,  PC31,                 bidir,        X,    29,     " &
     "1,      Z),  " &
     "27   (BC_1,  *,                      control,      " &
     "1),                        " &
     "26   (BC_7,  PB3,                    bidir,        X,    27,     " &
     "1,      Z),  " &
     "25   (BC_1,  *,                      control,      " &
     "1),                        " &
     "24   (BC_7,  PA17,                 bidir,        X,    25,     " &
     "1,      Z),  " &
     "23   (BC_1,  *,                      control,      " &
     "1),                        " &
     "22   (BC_7,  PC26,                 bidir,        X,    23,     " &
     "1,      Z),  " &
     "21   (BC_1,  *,                      control,      " &
     "1),                        " &
     "20   (BC_7,  PA18,                 bidir,        X,    21,     " &
     "1,      Z),  " &
     "19   (BC_1,  *,                      control,      " &
     "1),                        " &
     "18   (BC_7,  PA21,                 bidir,        X,    19,     " &
     "1,      Z),  " &
     "17   (BC_1,  *,                      control,      " &
     "1),                        " &
     "16   (BC_7,  PC27,                 bidir,        X,    17,     " &
     "1,      Z),  " &
     "15   (BC_1,  *,                      control,      " &
     "1),                        " &
     "14   (BC_7,  PA19,                 bidir,        X,    15,     " &
     "1,      Z),  " &
     "13   (BC_1,  *,                      control,      " &
     "1),                        " &
     "12   (BC_7,  PC15,                 bidir,        X,    13,     " &
     "1,      Z),  " &
     "11   (BC_1,  *,                      control,      " &
     "1),                        " &
     "10   (BC_7,  PA22,                 bidir,        X,    11,     " &
     "1,      Z),  " &
     "9    (BC_1,  *,                      control,      " &
     "1),                        " &
     "8    (BC_7,  PC13,                 bidir,        X,    9,      " &
     "1,      Z),  " &
     "7    (BC_1,  *,                      control,      " &
     "1),                        " &
     "6    (BC_7,  PA23,                 bidir,        X,    7,      " &
     "1,      Z),  " &
     "5    (BC_1,  *,                      control,      " &
     "1),                        " &
     "4    (BC_7,  PC12,                 bidir,        X,    5,      " &
     "1,      Z),  " &
     "3    (BC_1,  *,                      control,      " &
     "1),                        " &
     "2    (BC_7,  PA20,                 bidir,        X,    3,      " &
     "1,      Z),  " &
     "1    (BC_1,  *,                      control,      " &
     "1),                        " &
     "0    (BC_7,  PC0,                  bidir,        X,    1,      " &
     "1,      Z)   ";
 
 end sam4n16c;