This BSDL contains syntax errors!
--**************************************************************************
--*
--* File Name: K7K1636T2C_FC_R02.BSL
--* Revision: 0.2
--* Date: DEC. 03, 2009
--* Model: BSDL
--* Simulator: Agilent Technologies
--*
--* Dependencies: None
--*
--* Author: YUNWOO KIM
--* Email: yoonoo.kim@samsung.com
--* Phone: 82-31-208-7485
--* Company: SAMSUNG ELECTRONICS
--* Model: K7K1636T2C (512K x 36 DDRII SRAM 2-Word Burst)
--*
--* Description: Samsung Electronics 18 Meg (512K X 36) DDRII SRAM 2-Word Burst
--* BSDL model
--*
--* Limitation: IEEE 1149.1 Serial Boundary Scan (JTAG)
--*
--* Copyright 2002, SAMSUNG ELECTRONICS,.
--* All rights reserved
--*
--* Rev Author Phone Date Changes
--* --- -------------- -------------- ---------- -------------------------------------
--* 0.0 YUNWOO KIM (82) 31-208-7485 02/09/2006
--* 0.1 YUNWOO KIM (82) 31-208-7725 08/22/2006 Change the manufacturer ID
--* 0.2 YUNWOO KIM (82) 31-208-7725 12/03/2009 Change the PIN_MAP & BOUNDARY_REGISTER
--*************************************************************************/
entity K7K1636T2C is
generic (PHYSICAL_PIN_MAP : string := "FBGA");
port (
SA: in bit_vector(1 to 18);
CQB: buffer bit;
R_WB: in bit;
BW1B: in bit;
KB: in bit;
LDB: in bit;
CQ: buffer bit;
K: in bit;
BW0B: in bit;
BW2B: in bit;
BW3B: in bit;
QVAL: in bit;
DOFFB: in bit;
DQ: inout bit_vector (0 to 35);
TMS: in bit;
TDI: in bit;
TCK: in bit;
TDO: out bit;
--ZQ: in bit;
VREF: linkage bit_vector(0 to 1);
Vdd: linkage bit_vector(0 to 9);
Vss: linkage bit_vector(0 to 24);
VDDQ: linkage bit_vector(0 to 15);
NC: linkage bit_vector(0 to 40));
use STD_1149_1_2001.all;
attribute COMPONENT_CONFORMANCE of K7K1636T2C : entity is
"STD_1149_1_2001";
attribute PIN_MAP of K7K1636T2C : entity is PHYSICAL_PIN_MAP;
constant FBGA:PIN_MAP_STRING:=
" SA: (C7,R5,N5,P5,P4,R4,R3,N6,P7,N7, " &
" R7,R8,P8,R9,A9,B8,C5,B4), " & --Address
" CQB: A1, " & --Neg Echo Clock
" R_WB: A4, " & --Write
" BW1B: A7, " & --BYTE WRITE
" KB: A6, " & --Out Negative Clock
" LDB: A8, " & --Read
" CQ: A11, " & --Pos Echo Clock
" K: B6, " & --In Positive Clock
" BW0B: B7, " & --BYTE WRITE
" BW2B: A5, " & --BYTE WRITE
" BW3B: B5, " & --BYTE WRITE
" QVAL: P6, " & --Out Positive Clock
" DQ: (P11,M11,L11,K11,J11,F11,E11,C11,B11,P10, " &
" N11,M10,K10,J10,G11,E10,D11,C10,B3,D3,E3, " &
" F3,G3,K3,L3,N3,P3,B2,C3,D2,F2,G2,J3,L2,M3,N2), " &
" TMS: R10, " & --Test Mode Select
" TDI: R11, " & --Test Data-In
" TCK: R2, " & --Test Clock
" TDO: R1, " & --Test Data-Out
" DOFFB: H1, " & --Clock
--" ZQ: H11, " & --Input Impedance Match
" VREF: (H2,H10), " & --HSTL Input Reference Voltage
" VDD: (F5,F7,G5,G7,H5,H7,J5,J7,K5,K7), " &
" VSS: (C4,C8,D4,D5,D6,D7,D8,E5,E6,E7,F6,G6, " &
" H6,J6,K6,L5,L6,L7,M4,M5,M6,M7,M8,N4,N8), " &
" VDDQ: (E4,E8,F4,F8,G4,G8,H3,H4,H8,H9,J4,J8,K4,K8,L4,L8), " &
" NC: (A2,A10,A3,B1,B9,B10,C1,C2,C6,C9,D1,D9,D10,E1,E2,E9, " &
" F1,F9,F10,G1,G9,G10,J1,J2,J9,K1,K2,K9, " &
" L1,L9,L10,M1,M2,M9,N1,N9,N10,P1,P2,P9,R6) " ;
attribute TAP_SCAN_IN of TDI : signal is true;
attribute TAP_SCAN_OUT of TDO : signal is true;
attribute TAP_SCAN_MODE of TMS : signal is true;
attribute TAP_SCAN_CLOCK of TCK : signal is (50.0e6, BOTH);
attribute INSTRUCTION_LENGTH of K7K1636T2C : entity is 3;
attribute INSTRUCTION_OPCODE of K7K1636T2C : entity is
"EXTEST (000), " &
"IDCODE (001), " &
"SAMPLEZ (010), " &
"RESERV1 (011), " &
"SAMPLE (100), " &
"PRELOAD (100), " &
"RESERV2 (101), " &
"RESERV3 (110), " &
"BYPASS (111) " ;
attribute INSTRUCTION_CAPTURE of K7K1636T2C : entity is "001";
attribute INSTRUCTION_PRIVATE of K7K1636T2C : entity is
"RESERV1, RESERV2 ,RESERV3" ;
attribute IDCODE_REGISTER of K7K1636T2C : entity is
"000" & -- version
"00001011010000000" & -- part configuration
"00011001110" & -- Samsung JEDEC Code
"1"; -- 1149.1 requirement
attribute REGISTER_ACCESS of K7K1636T2C : entity is
"BOUNDARY (EXTEST,SAMPLEZ,SAMPLE), " &
"BYPASS (BYPASS) " ;
attribute BOUNDARY_LENGTH of K7K1636T2C : entity is 109;
attribute BOUNDARY_REGISTER of K7K1636T2C : entity is
"0 (BC_4, *, internal, X), " &
"1 (BC_4, QVAL, input, X), " &
"2 (BC_4, SA(8), input, X), " &
"3 (BC_4, SA(9), input, X), " &
"4 (BC_4, SA(10), input, X), " &
"5 (BC_4, SA(11), input, X), " &
"6 (BC_4, SA(12), input, X), " &
"7 (BC_4, SA(13), input, X), " &
"8 (BC_4, SA(14), input, X), " &
"9 (BC_7, DQ(0), bidir, X, 108, 0, Z), " &
"10 (BC_7, DQ(9), bidir, X, 108, 0, Z), " &
"11 (BC_4, *, internal, X), " &
"12 (BC_4, *, internal, X), " &
"13 (BC_7, DQ(11), bidir, X, 108, 0, Z), " &
"14 (BC_7, DQ(10), bidir, X, 108, 0, Z), " &
"15 (BC_4, *, internal, X), " &
"16 (BC_4, *, internal, X), " &
"17 (BC_7, DQ(2), bidir, X, 108, 0, Z), " &
"18 (BC_7, DQ(1), bidir, X, 108, 0, Z), " &
"19 (BC_4, *, internal, X), " &
"20 (BC_4, *, internal, X), " &
"21 (BC_7, DQ(3), bidir, X, 108, 0, Z), " &
"22 (BC_7, DQ(12), bidir, X, 108, 0, Z), " &
"23 (BC_4, *, internal, X), " &
"24 (BC_4, *, internal, X), " &
"25 (BC_7, DQ(13), bidir, X, 108, 0, Z), " &
"26 (BC_7, DQ(4), bidir, X, 108, 0, Z), " &
"27 (BC_4, *, internal, X), " &
"28 (BC_4, *, internal, X), " &
"29 (BC_4, *, internal, X), " &
"30 (BC_7, DQ(5), bidir, X, 108, 0, Z), " &
"31 (BC_7, DQ(14), bidir, X, 108, 0, Z), " &
"32 (BC_4, *, internal, X), " &
"33 (BC_4, *, internal, X), " &
"34 (BC_7, DQ(6), bidir, X, 108, 0, Z), " &
"35 (BC_7, DQ(15), bidir, X, 108, 0, Z), " &
"36 (BC_4, *, internal, X), " &
"37 (BC_4, *, internal, X), " &
"38 (BC_7, DQ(17), bidir, X, 108, 0, Z), " &
"39 (BC_7, DQ(16), bidir, X, 108, 0, Z), " &
"40 (BC_4, *, internal, X), " &
"41 (BC_4, *, internal, X), " &
"42 (BC_7, DQ(8), bidir, X, 108, 0, Z), " &
"43 (BC_7, DQ(7), bidir, X, 108, 0, Z), " &
"44 (BC_4, *, internal, X), " &
"45 (BC_4, *, internal, X), " &
"46 (BC_9, CQ, output2, X), " &
"47 (BC_4, *, internal, X), " &
"48 (BC_4, SA(15), input, X), " &
"49 (BC_4, SA(16), input, X), " &
"50 (BC_4, SA(1), input, X), " &
"51 (BC_4, * , internal, X), " &
"52 (BC_4, LDB, input, X), " &
"53 (BC_4, BW1B, input, X), " &
"54 (BC_4, BW0B, input, X), " &
"55 (BC_4, K, input, X), " &
"56 (BC_4, KB, input, X), " &
"57 (BC_4, BW3B, input, X), " &
"58 (BC_4, BW2B, input, X), " &
"59 (BC_4, R_WB, input, X), " &
"60 (BC_4, SA(17), input, X), " &
"61 (BC_4, SA(18), input, X), " &
"62 (BC_4, *, internal, X), " &
"63 (BC_4, *, internal, X), " &
"64 (BC_9, CQB, output2, X), " &
"65 (BC_7, DQ(27), bidir, X, 108, 0, Z), " &
"66 (BC_7, DQ(18), bidir, X, 108, 0, Z), " &
"67 (BC_4, *, internal, X), " &
"68 (BC_4, *, internal, X), " &
"69 (BC_7, DQ(19), bidir, X, 108, 0, Z), " &
"70 (BC_7, DQ(28), bidir, X, 108, 0, Z), " &
"71 (BC_4, *, internal, X), " &
"72 (BC_4, *, internal, X), " &
"73 (BC_7, DQ(20), bidir, X, 108, 0, Z), " &
"74 (BC_7, DQ(29), bidir, X, 108, 0, Z), " &
"75 (BC_4, *, internal, X), " &
"76 (BC_4, *, internal, X), " &
"77 (BC_7, DQ(30), bidir, X, 108, 0, Z), " &
"78 (BC_7, DQ(21), bidir, X, 108, 0, Z), " &
"79 (BC_4, *, internal, X), " &
"80 (BC_4, *, internal, X), " &
"81 (BC_7, DQ(22), bidir, X, 108, 0, Z), " &
"82 (BC_7, DQ(31), bidir, X, 108, 0, Z), " &
"83 (BC_4, DOFFB, input, X), " &
"84 (BC_4, *, internal, X), " &
"85 (BC_4, *, internal, X), " &
"86 (BC_7, DQ(23), bidir, X, 108, 0, Z), " &
"87 (BC_7, DQ(32), bidir, X, 108, 0, Z), " &
"88 (BC_4, *, internal, X), " &
"89 (BC_4, *, internal, X), " &
"90 (BC_7, DQ(33), bidir, X, 108, 0, Z), " &
"91 (BC_7, DQ(24), bidir, X, 108, 0, Z), " &
"92 (BC_4, *, internal, X), " &
"93 (BC_4, *, internal, X), " &
"94 (BC_7, DQ(25), bidir, X, 108, 0, Z), " &
"95 (BC_7, DQ(34), bidir, X, 108, 0, Z), " &
"96 (BC_4, *, internal, X), " &
"97 (BC_4, *, internal, X), " &
"98 (BC_7, DQ(26), bidir, X, 108, 0, Z), " &
"99 (BC_7, DQ(35), bidir, X, 108, 0, Z), " &
"100 (BC_4, *, internal, X), " &
"101 (BC_4, *, internal, X), " &
"102 (BC_4, SA(7), input, X), " &
"103 (BC_4, SA(6), input, X), " &
"104 (BC_4, SA(5), input, X), " &
"105 (BC_4, SA(4), input, X), " &
"106 (BC_4, SA(3), input, X), " &
"107 (BC_4, SA(2), input, X), " &
"108 (BC_2, * , controlr, 0) " ;
--NOTE:
--The BC_2 version of a control cell needs to be decided by the
--designer. The CONTROLR indicates that the scan cell is "set"
--with the safe value at power up AND when the JTAG TAP controller
--enters the Test LOGIC RESET STATE
end K7K1636T2C;