------------------------------------------------------------------------
-- A T M E L A R M M I C R O C O N T R O L L E R S --
------------------------------------------------------------------------
-- BSDL file
--
-- File Name: AT91SAM7XC256_TQ100_revC.BSD
-- File Revision: 3.0
-- Date: Fri Oct 12 2007
-- Created by: Atmel Corporation
-- File Status: Released
--
-- Device: AT91SAM7XC256_revC
-- Package: R_LQ100_M
--
-- Visit http://www.atmel.com for a updated list of BSDL files.
--
------------------------------------------------------------------------
-- Syntax and Semantics are checked against the IEEE 1149.1 standard. --
-- The logical functioning of the standard Boundary-Scan instructions --
-- and of the associated bypass, idcode and boundary-scan register --
-- described in this BSDL file has been verified against its related --
-- silicon by JTAG Technologies B.V. --
------------------------------------------------------------------------
------------------------------------------------------------------------
-- IMPORTANT NOTICE --
-- --
-- Copyright 2005 Atmel Corporation. All Rights Reserved. --
-- --
-- Atmel assumes no responsibility or liability arising out --
-- this application or use of any information described herein --
-- except as expressly agreed to in writing by Atmel Corporation. --
-- --
-- ------------------------------------------------------------------ --
-- This BSDL File has been verified on severals BSDL Syntax --
-- Checker/Compilers --
-- --
-- File Name: AT91SAM7XC256_TQ100_revC.bsd --
-- Timestamp: Friday, October 12, 2007 10:44 AM --
-- Results: Entity name: AT91SAM7XC256 --
-- IEEE Std 1149.1-2001 (Version 2.0) --
-- Packaging option selected is R_LQ100_M. --
-- Inputs = 0 --
-- Outputs = 0 --
-- Bidirectionals = 62 --
-- Instruction Reg Length = 3 --
-- Boundary Reg Length = 124 --
-- --
-- BSDL compilation of 547 lines completed without errors. -- --
-- --
------------------------------------------------------------------------
entity AT91SAM7XC256 is
-- This section identifies the default device package selected.
generic (PHYSICAL_PIN_MAP: string:= "R_LQ100_M");
-- This section declares all the ports in the design.
port (
icetck : in bit;
icetdi : in bit;
icetms : in bit;
jtagsel : in bit;
test : in bit;
nrst : in bit;
pa0 : inout bit;
pa1 : inout bit;
pa10 : inout bit;
pa11 : inout bit;
pa12 : inout bit;
pa13 : inout bit;
pa14 : inout bit;
pa15 : inout bit;
pa16 : inout bit;
pa17 : inout bit;
pa18 : inout bit;
pa19 : inout bit;
pa2 : inout bit;
pa20 : inout bit;
pa21 : inout bit;
pa22 : inout bit;
pa23 : inout bit;
pa24 : inout bit;
pa25 : inout bit;
pa26 : inout bit;
pa27 : inout bit;
pa28 : inout bit;
pa29 : inout bit;
pa3 : inout bit;
pa30 : inout bit;
pa4 : inout bit;
pa5 : inout bit;
pa6 : inout bit;
pa7 : inout bit;
pa8 : inout bit;
pa9 : inout bit;
pb0 : inout bit;
pb1 : inout bit;
pb10 : inout bit;
pb11 : inout bit;
pb12 : inout bit;
pb13 : inout bit;
pb14 : inout bit;
pb15 : inout bit;
pb16 : inout bit;
pb17 : inout bit;
pb18 : inout bit;
pb19 : inout bit;
pb2 : inout bit;
pb20 : inout bit;
pb21 : inout bit;
pb22 : inout bit;
pb23 : inout bit;
pb24 : inout bit;
pb25 : inout bit;
pb26 : inout bit;
pb27 : inout bit;
pb28 : inout bit;
pb29 : inout bit;
pb3 : inout bit;
pb30 : inout bit;
pb4 : inout bit;
pb5 : inout bit;
pb6 : inout bit;
pb7 : inout bit;
pb8 : inout bit;
pb9 : inout bit;
icetdo : out bit;
erase : linkage bit
);
use STD_1149_1_2001.all;
attribute COMPONENT_CONFORMANCE of AT91SAM7XC256: entity is "STD_1149_1_2001";
attribute PIN_MAP of AT91SAM7XC256: entity is PHYSICAL_PIN_MAP;
-- This section specifies the pin map for each port. This information is
-- extracted from the port-to-pin map file that was read in using the
-- "read_pin_map" command.
constant R_LQ100_M: PIN_MAP_STRING :=
"icetck : 79," &
"icetdi : 51," &
"icetms : 78," &
"jtagsel : 77," &
"test : 58," &
"nrst : 57," &
"pa0 : 81," &
"pa1 : 82," &
"pa10 : 18," &
"pa11 : 19," &
"pa12 : 20," &
"pa13 : 21," &
"pa14 : 22," &
"pa15 : 23," &
"pa16 : 24," &
"pa17 : 25," &
"pa18 : 26," &
"pa19 : 46," &
"pa2 : 86," &
"pa20 : 47," &
"pa21 : 49," &
"pa22 : 50," &
"pa23 : 55," &
"pa24 : 56," &
"pa25 : 59," &
"pa26 : 60," &
"pa27 : 73," &
"pa28 : 74," &
"pa29 : 75," &
"pa3 : 85," &
"pa30 : 80," &
"pa4 : 88," &
"pa5 : 89," &
"pa6 : 90," &
"pa7 : 91," &
"pa8 : 13," &
"pa9 : 14," &
"pb0 : 40," &
"pb1 : 41," &
"pb10 : 44," &
"pb11 : 45," &
"pb12 : 39," &
"pb13 : 30," &
"pb14 : 29," &
"pb15 : 35," &
"pb16 : 53," &
"pb17 : 36," &
"pb18 : 63," &
"pb19 : 64," &
"pb2 : 42," &
"pb20 : 65," &
"pb21 : 66," &
"pb22 : 67," &
"pb23 : 69," &
"pb24 : 70," &
"pb25 : 71," &
"pb26 : 72," &
"pb27 : 9," &
"pb28 : 10," &
"pb29 : 11," &
"pb3 : 43," &
"pb30 : 12," &
"pb4 : 54," &
"pb5 : 34," &
"pb6 : 31," &
"pb7 : 38," &
"pb8 : 28," &
"pb9 : 27," &
"icetdo : 76," &
"erase : 92";
-- This section specifies the TAP ports. For the TAP TCK port, the parameters in
-- the brackets are:
-- First Field : Maximum TCK frequency.
-- Second Field: Allowable states TCK may be stopped in.
attribute TAP_SCAN_CLOCK of icetck: signal is (1.000000e+06, BOTH);
attribute TAP_SCAN_IN of icetdi: signal is true;
attribute TAP_SCAN_MODE of icetms: signal is true;
attribute TAP_SCAN_OUT of icetdo: signal is true;
attribute TAP_SCAN_RESET of nrst : signal is true;
-- Specifies the compliance enable patterns for the design. It lists a set of
-- design ports and the values that they should be set to, in order to enable
-- compliance to IEEE Std 1149.1
attribute COMPLIANCE_PATTERNS of AT91SAM7XC256: entity is
"(jtagsel, test) (10)";
-- Specifies the number of bits in the instruction register.
attribute INSTRUCTION_LENGTH of AT91SAM7XC256: entity is 3;
-- Specifies the boundary-scan instructions implemented in the design and their
-- opcodes.
attribute INSTRUCTION_OPCODE of AT91SAM7XC256: entity is
"BYPASS (111)," &
"EXTEST (000)," &
"SAMPLE (100)," &
"INTEST (010)," &
"PRELOAD (100)," &
"HIGHZ (001)," &
"IDCODE (011)";
-- Specifies the bit pattern that is loaded into the instruction register when
-- the TAP controller passes through the Capture-IR state. The standard mandates
-- that the two LSBs must be "01". The remaining bits are design specific.
attribute INSTRUCTION_CAPTURE of AT91SAM7XC256: entity is "001";
-- Specifies the bit pattern that is loaded into the DEVICE_ID register during
-- the IDCODE instruction when the TAP controller passes through the Capture-DR
-- state.
attribute IDCODE_REGISTER of AT91SAM7XC256: entity is
"0000" &
-- 4-bit version number
"0101101100010000" &
-- 16-bit part number
"00000011111" &
-- 11-bit identity of the manufacturer
"1";
-- Required by IEEE Std 1149.1
-- This section specifies the test data register placed between TDI and TDO for
-- each implemented instruction.
attribute REGISTER_ACCESS of AT91SAM7XC256: entity is
"BYPASS (BYPASS, HIGHZ)," &
"BOUNDARY (EXTEST, SAMPLE, INTEST, PRELOAD)," &
"DEVICE_ID (IDCODE)";
-- Specifies the length of the boundary scan register.
attribute BOUNDARY_LENGTH of AT91SAM7XC256: entity is 124;
-- The following list specifies the characteristics of each cell in the boundary
-- scan register from TDI to TDO. The following is a description of the label
-- fields:
-- num : Is the cell number.
-- cell : Is the cell type as defined by the standard.
-- port : Is the design port name. Control cells do not have a port
-- name.
-- function: Is the function of the cell as defined by the standard. Is one
-- of input, output2, output3, bidir, control or controlr.
-- safe : Specifies the value that the BSR cell should be loaded with
-- for safe operation when the software might otherwise choose a
-- random value.
-- ccell : The control cell number. Specifies the control cell that
-- drives the output enable for this port.
-- disval : Specifies the value that is loaded into the control cell to
-- disable the output enable for the corresponding port.
-- rslt : Resulting state. Shows the state of the driver when it is
-- disabled.
attribute BOUNDARY_REGISTER of AT91SAM7XC256: entity is
--
-- num cell port function safe [ccell disval rslt]
--
"123 (BC_1, *, control, " &
"1), " &
"122 (BC_7, pa30, bidir, X, 123, 1, " &
"Z), " &
"121 (BC_1, *, control, " &
"1), " &
"120 (BC_7, pa0, bidir, X, 121, 1, " &
"Z), " &
"119 (BC_1, *, control, " &
"1), " &
"118 (BC_7, pa1, bidir, X, 119, 1, " &
"Z), " &
"117 (BC_1, *, control, " &
"1), " &
"116 (BC_7, pa3, bidir, X, 117, 1, " &
"Z), " &
"115 (BC_1, *, control, " &
"1), " &
"114 (BC_7, pa2, bidir, X, 115, 1, " &
"Z), " &
"113 (BC_1, *, control, " &
"1), " &
"112 (BC_7, pa4, bidir, X, 113, 1, " &
"Z), " &
"111 (BC_1, *, control, " &
"1), " &
"110 (BC_7, pa5, bidir, X, 111, 1, " &
"Z), " &
"109 (BC_1, *, control, " &
"1), " &
"108 (BC_7, pa6, bidir, X, 109, 1, " &
"Z), " &
"107 (BC_1, *, control, " &
"1), " &
"106 (BC_7, pa7, bidir, X, 107, 1, " &
"Z), " &
"105 (BC_1, *, control, " &
"1), " &
"104 (BC_7, pb27, bidir, X, 105, 1, " &
"Z), " &
"103 (BC_1, *, control, " &
"1), " &
"102 (BC_7, pb28, bidir, X, 103, 1, " &
"Z), " &
"101 (BC_1, *, control, " &
"1), " &
"100 (BC_7, pb29, bidir, X, 101, 1, " &
"Z), " &
"99 (BC_1, *, control, " &
"1), " &
"98 (BC_7, pb30, bidir, X, 99, 1, " &
"Z), " &
"97 (BC_1, *, control, " &
"1), " &
"96 (BC_7, pa8, bidir, X, 97, 1, " &
"Z), " &
"95 (BC_1, *, control, " &
"1), " &
"94 (BC_7, pa9, bidir, X, 95, 1, " &
"Z), " &
"93 (BC_1, *, control, " &
"1), " &
"92 (BC_7, pa10, bidir, X, 93, 1, " &
"Z), " &
"91 (BC_1, *, control, " &
"1), " &
"90 (BC_7, pa11, bidir, X, 91, 1, " &
"Z), " &
"89 (BC_1, *, control, " &
"1), " &
"88 (BC_7, pa12, bidir, X, 89, 1, " &
"Z), " &
"87 (BC_1, *, control, " &
"1), " &
"86 (BC_7, pa13, bidir, X, 87, 1, " &
"Z), " &
"85 (BC_1, *, control, " &
"1), " &
"84 (BC_7, pa14, bidir, X, 85, 1, " &
"Z), " &
"83 (BC_1, *, control, " &
"1), " &
"82 (BC_7, pa15, bidir, X, 83, 1, " &
"Z), " &
"81 (BC_1, *, control, " &
"1), " &
"80 (BC_7, pa16, bidir, X, 81, 1, " &
"Z), " &
"79 (BC_1, *, control, " &
"1), " &
"78 (BC_7, pa17, bidir, X, 79, 1, " &
"Z), " &
"77 (BC_1, *, control, " &
"1), " &
"76 (BC_7, pa18, bidir, X, 77, 1, " &
"Z), " &
"75 (BC_1, *, control, " &
"1), " &
"74 (BC_7, pb9, bidir, X, 75, 1, " &
"Z), " &
"73 (BC_1, *, control, " &
"1), " &
"72 (BC_7, pb8, bidir, X, 73, 1, " &
"Z), " &
"71 (BC_1, *, control, " &
"1), " &
"70 (BC_7, pb14, bidir, X, 71, 1, " &
"Z), " &
"69 (BC_1, *, control, " &
"1), " &
"68 (BC_7, pb13, bidir, X, 69, 1, " &
"Z), " &
"67 (BC_1, *, control, " &
"1), " &
"66 (BC_7, pb6, bidir, X, 67, 1, " &
"Z), " &
"65 (BC_1, *, control, " &
"1), " &
"64 (BC_7, pb5, bidir, X, 65, 1, " &
"Z), " &
"63 (BC_1, *, control, " &
"1), " &
"62 (BC_7, pb15, bidir, X, 63, 1, " &
"Z), " &
"61 (BC_1, *, control, " &
"1), " &
"60 (BC_7, pb17, bidir, X, 61, 1, " &
"Z), " &
"59 (BC_1, *, control, " &
"1), " &
"58 (BC_7, pb7, bidir, X, 59, 1, " &
"Z), " &
"57 (BC_1, *, control, " &
"1), " &
"56 (BC_7, pb12, bidir, X, 57, 1, " &
"Z), " &
"55 (BC_1, *, control, " &
"1), " &
"54 (BC_7, pb0, bidir, X, 55, 1, " &
"Z), " &
"53 (BC_1, *, control, " &
"1), " &
"52 (BC_7, pb1, bidir, X, 53, 1, " &
"Z), " &
"51 (BC_1, *, control, " &
"1), " &
"50 (BC_7, pb2, bidir, X, 51, 1, " &
"Z), " &
"49 (BC_1, *, control, " &
"1), " &
"48 (BC_7, pb3, bidir, X, 49, 1, " &
"Z), " &
"47 (BC_1, *, control, " &
"1), " &
"46 (BC_7, pb10, bidir, X, 47, 1, " &
"Z), " &
"45 (BC_1, *, control, " &
"1), " &
"44 (BC_7, pb11, bidir, X, 45, 1, " &
"Z), " &
"43 (BC_1, *, control, " &
"1), " &
"42 (BC_7, pa19, bidir, X, 43, 1, " &
"Z), " &
"41 (BC_1, *, control, " &
"1), " &
"40 (BC_7, pa20, bidir, X, 41, 1, " &
"Z), " &
"39 (BC_1, *, control, " &
"1), " &
"38 (BC_7, pa21, bidir, X, 39, 1, " &
"Z), " &
"37 (BC_1, *, control, " &
"1), " &
"36 (BC_7, pa22, bidir, X, 37, 1, " &
"Z), " &
"35 (BC_1, *, control, " &
"1), " &
"34 (BC_7, pb16, bidir, X, 35, 1, " &
"Z), " &
"33 (BC_1, *, control, " &
"1), " &
"32 (BC_7, pb4, bidir, X, 33, 1, " &
"Z), " &
"31 (BC_1, *, control, " &
"1), " &
"30 (BC_7, pa23, bidir, X, 31, 1, " &
"Z), " &
"29 (BC_1, *, control, " &
"1), " &
"28 (BC_7, pa24, bidir, X, 29, 1, " &
"Z), " &
"27 (BC_1, *, control, " &
"1), " &
"26 (BC_7, pa25, bidir, X, 27, 1, " &
"Z), " &
"25 (BC_1, *, control, " &
"1), " &
"24 (BC_7, pa26, bidir, X, 25, 1, " &
"Z), " &
"23 (BC_1, *, control, " &
"1), " &
"22 (BC_7, pb18, bidir, X, 23, 1, " &
"Z), " &
"21 (BC_1, *, control, " &
"1), " &
"20 (BC_7, pb19, bidir, X, 21, 1, " &
"Z), " &
"19 (BC_1, *, control, " &
"1), " &
"18 (BC_7, pb20, bidir, X, 19, 1, " &
"Z), " &
"17 (BC_1, *, control, " &
"1), " &
"16 (BC_7, pb21, bidir, X, 17, 1, " &
"Z), " &
"15 (BC_1, *, control, " &
"1), " &
"14 (BC_7, pb22, bidir, X, 15, 1, " &
"Z), " &
"13 (BC_1, *, control, " &
"1), " &
"12 (BC_7, pb23, bidir, X, 13, 1, " &
"Z), " &
"11 (BC_1, *, control, " &
"1), " &
"10 (BC_7, pb24, bidir, X, 11, 1, " &
"Z), " &
"9 (BC_1, *, control, " &
"1), " &
"8 (BC_7, pb25, bidir, X, 9, 1, " &
"Z), " &
"7 (BC_1, *, control, " &
"1), " &
"6 (BC_7, pb26, bidir, X, 7, 1, " &
"Z), " &
"5 (BC_1, *, control, " &
"1), " &
"4 (BC_7, pa27, bidir, X, 5, 1, " &
"Z), " &
"3 (BC_1, *, control, " &
"1), " &
"2 (BC_7, pa28, bidir, X, 3, 1, " &
"Z), " &
"1 (BC_1, *, control, " &
"1), " &
"0 (BC_7, pa29, bidir, X, 1, 1, " &
"Z) ";
end AT91SAM7XC256;